Still no tilapia!!!

Well, it's been at least a month now since I expected to have tilapia in the pond, and we still don't have any. At least now I know why. The nice folks at Foster Lake and Pond Management get their tilapia from a supplier in southern NC. That guy had an equipment failure this spring and moved his tilapia from the nice, protected shelter of his indoor operation into an outdoor pond on his property. That was great until a hungry otter came in and ate ALL of the fish! Of course, the farmer didn't tell Foster Lake and Pond, but tried to find an alternate supply to meet his delivery. He could not, and that screwed FLP, which, in turn, screws us. FLP was trying to find an alternate supplier late last week, but they haven't called, and I'm beginning to wonder if it is even worth it at this point. We're seriously considering just getting some cheap fish - the cheapest we can find - to stock the pond with for the veggies, so at least we'll know how the veggie part of the aquaponics system works. I must say, though, that the veggies seem to be doing OK despite only two fish. Photo of the main bucket is from June 1. We harvested a yellow squash yesterday.

Mid-May Update

I thought I should update how things are going, since it's been about a month. First, we still don't have any tilapia. The word from Foster Lake and Pond Management is that they don't have their tilapia in yet, 'cause of the colder weather this spring. They were confident that they would be in soon, and they'll be larger than usual, so there should still be enough time to grow them out to plate size before it gets too cold this spring.

Sometime soon after my April post, we had a torrential rain that eroded out the mound that the upper bog was sitting on, 'causing it to slant. It was not level enough to use, so I had to empty out all the gravel and re-level. I decided at that point to just run the outflow directly into the pipe that spills back into the pond instead of filtering it through the second bog. Everything's working great now, but I lost all my plants in the upper bog.

As you can see from the photos below, though, we bought some tomato, pepper, and squash seedlings, and they seem to be doing OK. Note also that the lower bog lettuce is coming in, and some tomatoes from seed are also coming in. I think that they aren't getting quite enough nutrients from the two fish that are living in the pond (oh yeah, one of the koi died mysteriously. he was always a little sickly from day 1).

soybeans, lettuce, small tomatoes are original. squash, large tomatoes from seedling

what you don't see clearly here in the upper bog are the little cucumber seedlings coming up from an extra packet of cucumber seeds we had in the house. there are some little pepper seedlings hanging on, as well.

trying their hardest to poop enough for all the plants!

The plants in the pond are doing amazingly well. Considering that they were dormant and kind of runty looking, they have truly gone through a miraculous transformation. Below, you can see what one month meant to a bog arum. And, we were fortunate enough to get one of our iris versicolor's to bloom. For a larger version of that photo, click here.


Next update after the tilapia go in. It will be interesting to see what happens, as the pond system is in a nice equilibrium right now. The water is crystal clear. Many of the plants are yellowing, so I believe they need more nutrients (and soon!), but for now, everything appears to be surviving. I anticipate that once the fish are in, the yellowing will stop and the growing will increase. Stay tuned!

Pond costs

I thought I would share just how much this pond cost, not including time and labor or electricity for running the pond pump (~100 watts/24 hours a day), just so you can get an idea of the amount of effort and money required for set up. I'll also estimate yearly operating costs.

- Landscaping (plants, dirt, etc.): $1756 (48% of the cost)
*$1366 of that was for rocks/gravel - all delivered
- Pond/bog construction (liner, skimmer, plumbing, electrical, bog tubs, caulk, etc.): $1353 (37% of the cost)
- Pumps/filters: $276 (7% of the cost)
*I bought a backup pump and replacement filters, in addition to current one)
- Fish, fish food, meters, nutrient additives: $307 (8% of the cost)

Grand total: $3692

Annually, you'll need to buy new fish, fish food, nutrients, some plumbing/caulk for leak fixes, filters. I imagine that will be no more than $500, but I'll keep track and document after one year has passed.

Aquaponics Happening!

Well, everything is finally done! The only thing that remains is to pick up my tilapia the first week of May. The pond is running, the bogs are running, the native plant section is planted and mulched, and the plants in the pond seem to be getting used to their new home. The two garden bogs are already showing signs of seedlings, less than one week after putting the seeds in! The native plant bog is looking great, and one of the dwarf crested irises is blooming! The only species that I'd like to add are some pitcher plants, but the only ones that I can find so far (Lowe's) aren't the native varieties found in NC.

Species List:
In the pond:
- iris versicolor (blue water iris)
- pellandra virginica (bog arum)
- lubellia syphilitica (great blue lobellia)
- sauronus sp. (lizard's tail)
- pontederia cordata (pickerel rush)
- acorus calamus (sweet flag)
- alisma subcordata (water plantain)

In the pond bog:
- chamaelirium luterm (fairywand)
- lobellia cardinalis (cardinal flower)
- hydrophyllum virginiaum (eastern waterleaf)
- iris cristata (dwarf crested iris)
- iris bericaulis (zigzag iris)

In the native perennial garden surrounding the pond:
- oenothera fruticosa (southern sundrops)
- callicarpa americana (american beauty berry)
- peristemon smalli (small's beardstongue)
- symphotichum oblongifolium (eastern aromatic aster)
- muhlenbergia capillaris (hairgrass)
- coreopsis triptens (tall tickseed)
- silene virginica (fire-pink)
- helianthus augustifolius (swamp sunflower)
- rudbeckia fulgida (orange coneflower)
- stokesia laevis (stokes'-aster)
- heuchera americana (american alumroot)

Waterfall and First Bog Rough Draft

So, as you can see, it's starting to take shape! We had some nice slabs of slate lying around the yard, so I gathered up what wasn't being used, and am now using it for the waterfall. It makes a nice path for the water, since it's so smooth and natural looking. After I finish up this web design gig that I'm doing, I'll have enough money to get another load of rocks to finish up the landscaping and pretty it up. Note that the pond is only about half full at this point. Still need a couple of big rain events to finish it up. I've attached the garden hose to my rain barrel on the porch, so I'm using the water from my roof to fill the pond.

Here's a side profile of the design. You can see the 110-gallon bucket "bog" on the right. There's a PVC inlet on the right. This is where the pond water will come in. The PVC pipe has a bunch of holes drilled in it starting about half way down. The theory is that the water will fill in the PVC pipe (which keeps out the gravel), then pour out through the holes to fill up the rest of the bog. The outlet for the bog is contained in the PVC pipe on the left, which also has holes drilled in the bottom half. The water rises up to a point just below the surface, where it exits via another pipe, that is drilled through the bog wall.

If you look carefully, you can see the mistake hole on the right side of the PVC. My first try, the pipe was tilted up so that it almost came to the top of the PVC. This turned out to be too high to drain the water out before the water reached the surface of the bog and spilled over the side. No harm done - redrill - and recaulk (using aquarium-safe silicone).

Next step will be to install a two-way switch (ball valves and a T), so that I can direct the water flow through the supplemental 2 grow beds during the summer when there are more fish in the pond. Then, I'll probably try and set up the other two grow beds, fill in with gravel, and connect to the bog pictured above. Then, I'll need a little dirt to fill around the bog above. The plan is to put dirt all the way around, then carve in some steps for some above-ground planters. Then, when the rocks are in, rock all around and tidy up.

Pond Installed!!

Well, the pond itself is installed! A lot of things came together last weekend (1/11-1/13): the underlay/liner was delivered, rocks were delivered the previous Wednesday, and I found a guy who could get me a load of gravel to suit that day. So, Friday, after everything arrived, I figured I had all the ingredients, so I might as well cook!

Rocks (rounded river, large flat) and gravel for pond

After putting in the underlay, Liz helped me stretch out the liner and stuff it into all the cracks. I think we probably could have done a better job of smoothing out all the wrinkles, but given that this was our first real attempt at this, I think we did OK. Also complicating the installation was the fact that the water table was up above the bottom of the pond, so the pond bottom at its deepest part was actually more like quicksand. Once rocks were put in, the bottom sort of bulged out, but I figure it won't make too much of a difference once the water is in and pushing down on everything.

Liner in place (EPDM, Firestone Pond Guard, fish safe)

Rounded river rocks in place to hold in/hide liner

After some work getting everything into the skimmer and running the plug through some makeshift conduit to the outlet, I covered everything up and put out the big flat rock on the top level of the pond. It was at this point that I realized that we vastly UNDER estimated our need for rock. We ended up using 2 tons of rocks just for inside the pond and the pond lip. We easily need another ton around the top outside, and then at least a ton for the water. It's a bummer, as we'll have to pay for shipping twice. The lesson here is BUY MORE ROCK THAN YOU THINK YOU COULD CONCEIVABLY USE!! We actually did that, but since we had nothing to compare it to, we did a poor job of estimating.

After the rocks were up, I cut away the excess liner. By the way, it looks like we ordered way too big of a liner, but as it turns out, you can only order it in multiples of 5. We ordered 25' X 25'. But after cutting around the pond, there were many sections that we less than 5' wide, so we did not over order. It's definitely better to over order than to not have enough to go all the way up.

After some rain and snow this weekend, the pond is filling up nicely! I resolved to not use any groundwater to fill it, given North Carolina's drought situation, so I hooked up one end of a hose to our overflow for our rain barrel, so the pond gets filled with rainwater/melt-water from half the roof of our house.

Unfortunately, I must have put a little too much on my back, and it gave out unexpectedly last week without notice. As soon as it gets better, I have to set up the grow bed/bog and waterfall, as the pond will soon be full enough to begin running the pump.

Done with Digging!

Well, since my last post, we moved from design phase into digging. Lots of digging! I have a series of photos to show the progress...

Modest Beginnings

Thanks to a group of friends, real progress!

Building on the group work and digging deeper (~4' deep)

Laying in the pipe that will carry the water from the pump (will be inside the black skimmer box on the bottom) to the hydroponic beds inside the garden fence. Note that I partially filled in the opening in the top step. Since we originally had intended that end to be a "deep end" and have the pump situated there, we left that open. Given the new arrangement with the skimmer (the pump sits inside the skimmer), I had to backfill the step back in. I wasn't able to get it as high as the other steps, but we should be able to stack rocks there to get it up to height once the liner is in.

Pipe's covered up, and a rough outline of a waterfall is in place. Note the large plastic tub. That will be a bog and will also serve as a grow bed, but for more typical pond-oriented vegetation

So, the idea is simple. Water flows into the skimmer box where the skimmer takes out leaves and other surface-floaties. Water is then pumped through the black pipe, which will be completely covered, into the garden area and into some sort of hydroponic grow box. We'll probably get a couple more of those 110 gallon plastic tubs, as they look to be about the right size. The water will fill up each plastic tub, which, in turn, will flow into the next plastic tub, and eventually out of the last plastic tub (pictured above) and out through a waterfall (base construction will be out of cinder blocks) and back into the pond.

Still left to do...
- Get underlayment and liner installed. This will require a 25' X 25' liner, just for the pond, which weighs about 200 pounds. So, I'll need to get some help! I'll also need a small liner for the waterfall (size yet to be determined).
- To secure the liner, I'm going to have to get some rocks delivered. These don't have to be fancy rocks, as any rocks that will be inside the pond will end up getting covered in algae. You want rocks and gravel inside your pond to serve as a place for the beneficial ammonia-converting bacteria to attach to and also to hide the liner.
- Get power to the area. I've already purchased an outdoor outlet set and outdoor wire, but I need to dig a trench (>12") from the pond to the shed, where I plan on installing a mini-breaker box to provide power. Having a double out let pond-side will be nice, in case we need to plug anything else in. The pump itself will run 24 hours a day.
- After the liner is in place, I can work on constructing the waterfall, as it will sit on top of the pond liner.
- Get dirt, gravel, and rocks delivered. Dirt to build up the bog and waterfall area and any parts of the berm that need work. Gravel to fill up the grow beds and disperse inside the pond to conceal the liner. And rocks to landscape the pond, hide the waterfall cinderblocks and waterfall bog plastic container.

So, that's where we're at for now. Looks like we'll take a short break from pond work for the holidays, but I'm really hoping that we can be pretty much up and running by the end of January!!

Look for another update after the liner's in place.